The IEEE/ASME Transactions on Mechatronics invites papers for a special section on
“Hysteresis in Modern Mechatronic Systems: Modeling, Identification, and Control” to present developments in the area of hysteresis in
smart mechatronic systems and to alleviate the difficulties associated with hysteresis nonlinearity in new smart mechatronic systems. The
objective is to investigate new techniques for high performance smart mechatronic systems with consideration of hysteresis effects. This
section will provide an opportunity for researchers and practitioners to exchange their most recent accomplishments and challenges in the
area of modeling and compensation of hysteresis nonlinearity in smart mechatronic systems. It is expected that this issue will bring together
the current advances in this area that could encourage future research directions in this field. Contributions from industry are encouraged,
and both theoretical and experimental works are welcome. Potential topics include but are not limited to:
- Developments in hysteresis models for mechatronic systems
- Identification techniques for hysteresis models
- Developments in compensation schemes for hysteresis
- Limit cycles in systems with hysteresis
- Signals estimation/observation in systems with hysteresis
- Hysteresis in smart materials-based mechatronic systems
- Hysteresis in ferromagnetic and ferroelectric actuators and sensors
- Hysteresis in micromechatronic systems
- Hysteresis in pneumatic actuators
- Hysteresis in sensors
- Hysteresis in systems with friction
- Hysteresis in thermal and energy systems
- Hysteresis in electronic/electrical circuits and systems
- Hysteresis in robotic systems
- Hysteresis in mechanical systems with backlash
Manuscript submission
Manuscripts should be submitted through the online submission service available at
http://mc.manuscriptcentral.com/tmech-ieee. The cover letter should
report the following statement: This paper is submitted for possible publication in the focused section on Hysteresis in Smart Mechatronic Systems:
Modeling, Identification, and Control. All manuscripts will be subjected to the peer review process. If you have any question relating to this Focused
Section, please email one of the Guest Editors.
Important dates
Paper Submission..........................................................................October 1, 2014
Completion of First Review................................................................February 1, 2015
Submission of Revised Papers..............................................................April 1, 2015
Completion of Final Review................................................................June 1, 2015
Submission of Final Manuscripts and Copyright Forms.......................................August 1, 2015
Publication...............................................................................December 2015
Guest Editors
Mohammad Al Janaideh
Department of Mechatronics Engineering,
The University of Jordan,
Amman 11942, Jordan.
Email: aljanaideh 'at' gmail 'dot' com
Micky Rakotondrabe
Department of Automatic Control and MicroMechatronic Systems (AS2M)
FEMTO-ST Institute
Full Professor, ENIT (National School of Engineering in Tarbes)
Toulouse INP
Address:
DIDS team (Decision and Interoperability for Dynamic Systems)
LGP (Laboratoire Génie de Production)
ENIT (National School of Engineering in Tarbes)
Toulouse INP
47, Avenue d'Azereix
65000 Tarbes - FRANCE
Email: mrakoton 'at' enit 'dot' fr
Homepage: m.rakoton.net
Xiaobo Tan
Department of Electrical and Computer Engineering,
Michigan State University,
East Lansing, MI 48824, USA.
Email: xbtan 'at' egr 'dot' msu 'dot' edu
More details can be found at the: Call For Papers - Focused Session.
Webmaster: Micky Rakotondrabe